- 技術規格
- 控制器一
- 控制器二
- 控制器三
- 資料及下載
| 一般規格 |
| 產品編號: | DS07-S000-00-1 | 額定功率: | 700W |
| 額定風速: | 12 m/s | 額定轉速: | 405 rpm |
| 切入風速: | <3 m | 切離風速: | 15 m/s |
| 可承受極限風速: | 60 m/s(3秒陣風) |
| 尺寸/重量 |
| 旋轉直徑: | 1.93m | 旋轉高度: | 1.6 m |
| 塔柱高度(不含在產品中): | 3m (建議最低高度) | 總高度: | 4.6m (最低) |
| 總重量: | 60 Kgs | (不含塔柱重量) |
| 旋轉軸規格 |
| 外轉葉片: | 3 片 |
| 內轉葉片: | 2層4片 |
| 內外葉片材質: | 陽極氧化鋁 (Anodized Aluminum) |
| 轉軸材質: | 熱鍍鋅鋼 (SS400) / 陽極氧化鋁 (Anodized Aluminum) |
| 發電機規格 |
| 發電機型式: | AC, 3 Phase, Synchronism PMG |
| 額定輸出: | 700W |
| 煞車系統 |
| 自動煞車系統: | 自動超速三相短路 |
| 手動煞車系統: | 外掛式三相短路開關(選配) |
| 操作環境 |
| 發電機溫度: | -20~40°C |
| 控制器溫度: | -10~40°C |
| 環境濕度: | 95% max. |
| 注意事項 |
- 以上資料及規格如有變更，恕不另行通知!
- 以上資訊之提供是以3公尺標準塔柱為基礎。如果計劃裝設高於3公尺之塔柱，請諮詢相關之合格工程技師。
- 請務必尊遵守當地政府相關法令規定選擇適當地點安裝。如果計劃裝置於大樓屋頂，請諮詢合格之土木技師或結構技師對建築物本身之結構確認可行，始能安裝。本公司不擔保建築物或任何安裝地點之安全。
| 2KW併網型風能控制器 |
| Model: | 2KW Grid Tied Wind controller |
| Rated Output: | 2KW |
| Max. DC input voltage: | 500V DC |
| MPPT operation range | 30~400 V DC |
| Max. DC input current: | 10A DC |
| Grid voltage range: | 180~270 V AC(adjustable) |
| Grid frequency | 50/60 HZ |
| Operational phase | single phase |
| Output power factor | > 0.99 |
| Efficiency | > 0.97% |
| Display mode | LCD display |
| Protection Features | 1. DC reverse-polarity protection |
| 2. AC short circuit protection | |
| 3. islanding protection | |
| 4. temperature protection | |
| Power consumption | < 6W(standby mode) |
| Ingress protection | IP65 |
| Operational Temperature | -10~40℃ |
| Communication | RS-485 data port |
| Dimensions (L x W x H in mm): | 339x565x164 |
| Weight: | 11 Kgs |
| Regulatory conformity | EN62109-1 |
| EN62109-2 | |
| VDE0126-1-1 | |
| UL1741 |
| 注意事項 |
- 以上資料及規格如有變更，恕不另行通知!
| MAX-1000 離網型風能充電器 |
| Model: | MAX-1000 wind charger |
| Rated Output: | 48V DC |
| Input voltage | 0~450V DC(after rectifier) |
| Rated output current | 25A DC |
| Protection Features | 1. Battery over charge |
| 2.Reverse connection of battery | |
| 3.Current limitation of wind turbine | |
| 4.Power limitation | |
| 5.Unloading brake | |
| 6.Input lightning | |
| Power consumption | <2W(standby mode) |
| Communication | RS-485 |
| Display mode | LCD display |
| Operation Temperature | -10~+40℃ |
| Regulatory conformity | EN60950-1 |
| EN55022 | |
| EN61000-3-2 | |
| EN61000-3-3 | |
| EN55024 |
| 注意事項 |
- 以上資料及規格如有變更，恕不另行通知!
| DS-700 離網型風能充電器 |
| Model: | WG481000 |
| Rated Output: | 700 Watt |
| Max. Output: | 1000 Watt |
| Input: | 3 phase AC input |
| Voltage and Current range: | Special design to meet DS-700 Wind Generator operation range |
| Power Control: | With MPPT feature |
| Output: | Charge to 48Vdc Battery Bank with minimum 200Ah capacity |
| Max. charging current 20A | |
| Protection Features: | 1. Wind turbine over-speed protection |
| 2. Input over voltage protection | |
| 3. Battery over charge protection | |
| 4. Battery low voltage protection | |
| 5. Over temperature protection | |
| Power consumption: | 1 Watt ( Standby Model ) |
| LCD Display | |
| Communication: | RS-485 data port |
| Dimensions (L x W x H in mm): | 200 x 142 x 50 |
| Weight: | 12 Kgs |
| 注意事項 |
- 以上資料及規格如有變更，恕不另行通知!
